Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 120 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Lane Assignment Page
TDM
6B
6C
Title21
ATA
SeGo
On the Lane Assignment
page:
Select First to
Read/Program or
Majority from the Lane
Assignment Algorithm
box.
User with
Change
Configuration
permission
VTALGO
VTAG6B
VTAG6C
VTAGAG
VTAGAA
VTAGSG
Majority
First to
read/program
Majority
Runs the selected tag (channel) assignment
algorithm.
Sets which algorithm is used for determining OBU
lane assignment between channels.
Majority voting make channel assignment decision
based on handshake count from each channel at
time of voting.
Communication
Method
From the Inter-Reader
panel on the Lane
Assignment page:
Select Disabled, Legacy
CRA, or Ethernet.
User with
Change
Configuration
permission
MULTRD
Disabled
Disabled
Legacy CRA
Ethernet
Disabled: Reader is not set to communicate with
other Readers.
Legacy CRA: Voting between Readers relies on
writing to TDM tags.
Ethernet: Voting between Readers relies on
communicating between readers on IR network.
Sets how Readers communicate when determining
lane assignments between multiple Readers