Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 119 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Data Bits
From the LC Serial panel
on the Lane Controller
page:
With the Serial Port
State enabled, select the
desired Data Bits from
the drop-down box.
User with
Change
Configuration
permission
COMBTZ
8
5
6
7
8
sets the LPM data bits for individual COM ports
to configure the LPM data bits on a port by port
basis
Parity
From the LC Serial panel
on the Lane Controller
page:
With the Serial Port
State enabled, select the
desired Parity from the
drop-down box.
User with
Change
Configuration
permission
COMPTY
None
None
Even
Odd
sets the LPM parity for individual COM ports
to configure the LPM parity on a port by port basis
Stop Bits
From the LC Serial panel
on the Lane Controller
page:
With the Serial Port
State enabled, select the
desired Stop Bits from
the drop-down box.
User with
Change
Configuration
permission
COMSTP
1
1-2
sets the LPM stop bits for individual COM ports
to configure the LPM stop bits on a port by port
basis