Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 117 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
4 - Commercial
Vehicle (CVO) Delay
[ms]
On the LC Latency by Tag
Type panel on the Lane
Controller page:
Enter a time (in
milliseconds) in the
Commercial Vehicle
(CVO) Delay field..
User with
Change
Configuration
permission
LYCTL4
0
0-5000
Sets report delay time in milliseconds for CVO OBUs
(Type 4).
Used to slow down the transaction report of Type 4
OBUs to the LC for those legacy sites where the LC is
expecting BADGER Reader timing
5 - OBU Feedback
Tag Delay [ms]
On the LC Latency by Tag
Type panel on the Lane
Controller page:
Enter a time (in
milliseconds) in the OBU
Feedback Tag Delay
field..
User with
Change
Configuration
permission
LYCTL5
0
0-5000
Sets report delay time in milliseconds for Feedback
OBUs (Type 5).
Used to slow down the transaction report of Type 5
OBUs to the LC for those legacy sites where the LC is
expecting BADGER Reader timing
6 - HOT Tag Delay
[ms]
On the LC Latency by Tag
Type panel on the Lane
Controller page:
Enter a time (in
milliseconds) in the HOT
Tag Delay field..
User with
Change
Configuration
permission
LYCTL6
0
0-5000
Sets report delay time in milliseconds for HOT OBUs
(Type 6).
Used to slow down the transaction report of Type 6
OBUs to the LC for those legacy sites where the LC is
expecting BADGER Reader timing.