Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 116 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
0 - Interior FPT Delay
[ms]
On the LC Latency by Tag
Type panel on the Lane
Controller page:
Enter a time (in
milliseconds) in the 0-
Interior FPT Delay field
User with
Change
Configuration
permission
LYCTL0
0
0-5000
Sets report delay time in milliseconds for Interior
FPT OBUs (Type 0)
Used to slow down the transaction report of Type 0
OBUs to the LC for those legacy sites where the LC is
expecting BADGER Reader timing
1 - Exterior FPT Delay
[ms]
On the LC Latency by Tag
Type panel on the Lane
Controller page:
Enter a time (in
milliseconds) in the
Exterior FPT Delay field
User with
Change
Configuration
permission
LYCTL1
0
0-5000
Sets report delay time in milliseconds for Exterior
FTP OBUs (Type 1).
Used to slow down the transaction report of Type 1
OBUs to the LC for those legacy sites where the LC is
expecting BADGER Reader timing
2 - Exterior LPT Delay
[ms]
On the LC Latency by Tag
Type panel on the Lane
Controller page:
Enter a time (in
milliseconds) in the
Exterior LPT Delay field..
User with
Change
Configuration
permission
LYCTL2
0
0-5000
Sets report delay time in milliseconds for Exterior
LPT OBUs (Type 2).
Used to slow down the transaction report of Type 2
OBUs to the LC for those legacy sites where the LC is
expecting BADGER Reader timing
3 - LCD Display Delay
[ms]
On the LC Latency by Tag
Type panel on the Lane
Controller page:
Enter a time (in
milliseconds) in the LCD
Display Delay field..
User with
Change
Configuration
permission
LYCTL3
0
0-5000
Sets report delay time in milliseconds for LCD
Display OBUs (Type 3).
Used to slow down the transaction report of Type 3
OBUs to the LC for those legacy sites where the LC is
expecting BADGER Reader timing