Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 114 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Dual-Destination
Buffering Mode
On the LC Advanced
panel on the Lane
Controller page:
Select mode from the
drop-down list.
User with
Change
Configuration
permission
LCDDBM
Fully
Independent
Standard (Legacy)
Fully Independent
Specifies how Dual-Destination message buffering is
to be performed. Select 'Standard (Legacy)' mode
to have buffering starts when both Ethernet and
Dual-Ethernet links are down, buffered messages
are drained when both Ethernet and Dual-Ethernet
links are resumed. Set to 'Fully Independent' to have
fully independent buffering between the Ethernet
and Dual-Ethernet links when link failures occur.
Status Message
Buffering
On the LC Advanced
panel on the Lane
Controller page:
Set toggle switch to ON
to enable buffering.
User with
Change
Configuration
permission
LcStBf
0
0-1
If enabled, instructs the Reader to buffer status
messages in the event of a communications link loss
with the Lane Controller.
Initial Read Report
(IREAD) Message
Buffering
On the LC Advanced
panel on the Lane
Controller page:
Set toggle switch to ON
to enable buffering.
User with
Change
Configuration
permission
LcIrBf
0
0-1
If enabled, the Reader buffers Initial Read Report
(IREAD) messages in the event of a communications
link loss with the the Lane Controller.
Departure Report
Message Buffering
On the LC Advanced
panel on the Lane
Controller page:
Set toggle switch to ON
to enable buffering.
User with
Change
Configuration
permission
LcDrBf
0
0-1
If enabled, the Reader buffers Departure Report
messages in the event of a communications link loss
with the the Lane Controller.