Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 112 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Click on checkbox to
enable /disable what to
be included in report.
Raw Handshake
Reports
On the LC Extended
Reporting panel on the
Lane Controller page:
Click on checkbox to
enable /disable what to
be included in report.
User with
Change
Configuration
permission
EIR_RH
0
0 - 31
Specifies which Extended Information values are to
be included in Raw Handshake reports sent to the
Lane Controller.
6B Transponder Data
Format
On the LC Report Format
panel on the Lane
Controller page:
Select format from the
drop-down list.
User with
Change
Configuration
permission
I6BFmt
Standard UID (0)
Standard UID (0)
eATA 8-bit ASCII
Alphanumeric (2)
Combined
UID+eATA (3)
Specifies the type of 6B report formatting to employ
Suppress 6B Clone
Tags
On the LC Report Format
panel on the Lane
Controller page:
Set toggle switch to ON
to suppress report.
User with
Change
Configuration
permission
NO6BCT
1
0 - 1
If enabled, instructs the Reader to suppress the
reporting of 6B Clone Tags.
ATA Tag Report
Filtering/Threshold:
On the LC Report Format
panel on the Lane
Controller page:
User with
Change
Configuration
permission
ATAFLT
0
Disabled 0
Enabled:1 Read
Enabled:2 Reads
Use this option to perform filtering of ATA tag
reports (Voting, Post Capture) based on a set
handshake count threshold.