Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 111 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
With Post-Capture-Zone
Report enabled, input
multiple count for all tag
protocols.
Minimum Speed
Report sample count
(ms)
On the LC Reporting
panel on the LC page
User with
Change
Configuration
permission
EVSMSS
1
1 - 10
The reader sets the ZC field to 9999 in the EVS
report when the sample count is less than the
specified minimum.
Estimated-Vehicle-
Speed (EVS) Report
On the LC Reporting
panel on the Lane
Controller page:
Set toggle switch to ON
to enable report type for
all tag protocols.
User with
Change
Configuration
permission
EVSRPT
0
0-1
Used to choose to generate and send an Estimated
Vehicle Speed report
Status Reports
On the LC Extended
Reporting panel on the
Lane Controller page:
Click on checkbox to
enable /disable what to
be included in report.
User with
Change
Configuration
permission
EIR_SR
0
0-1
Specifies which Extended Information values are to
be included in Status Reports sent to the Lane
Controller.
Transaction Reports
(Initial-Read, Voting,
Post-Capture,
Est.Veh.Speed)
On the LC Extended
Reporting panel on the
Lane Controller page:
User with
Change
Configuration
permission
EIR_TN
0
0-1
Specifies which Extended Information values are to
be included in Transaction Reports (Initial Read,
Voting, Post-Capture, and/or Estimate Vehicle
Speed) reports sent to the Lane Controller.