Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 110 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Set toggle switch to ON
to enable report type for
all tag protocols.
Initial Read (IREAD)
Report
On the LC Reporting
panel on the Lane
Controller page:
Set toggle switch to ON
to enable report type for
all tag protocols.
User with
Change
Configuration
permission
INIRPT
0
0-1
Used to choose to send or not to send an initial
report the first time a new tag is seen
Raw Handshake
Report
On the LC Reporting
panel on the Lane
Controller page:
Set toggle switch to ON
to enable report type for
all tag protocols.
User with
Change
Configuration
permission
RAWRPT
0
0-1
Used to send a handshake to the LC for every tag
read
Post-Capture-Zone
Report
On the LC Reporting
panel on the Lane
Controller page:
Set toggle switch to ON
to enable report type for
all tag protocols.
User with
Change
Configuration
permission
PCZRPT
0
0-1
Used to choose to generate and potentially send a
post-capture-zone report
Post-Capture-Zone
Voting Time
(multiples of VT)
On the LC Reporting
panel on the Lane
Controller page:
User with
Change
Configuration
permission
PCZRTx
1
1 - 5
Specifies how many multiples of VT to wait after
voting time to perform post-capture-zone report
calculations.