Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 103 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Agency ID
From the Title21
Advanced panel of the
Tag Protocol page:
Enter a numeric agency
id.
User with
Change
Configuration
permission
T21AID
0
0- 65535
Specify the desired Title21 Agency ID, in decimal.
Reader ID
From the Title21
Advanced panel of the
Tag Protocol page:
Enter a numeric reader
id.
User with
Change
Configuration
permission
T21RID
0
0-4294967295
Specify the desired Title21 Reader ID, in decimal.
Enable Title21
Acknowledge
Messages
From the Title21
Advanced panel of the
Tag Protocol page:
Set toggle switch to ON
to enable.
User with
Change
Configuration
permissions
T21AME
0
0-1
Select whether or not to enable the transmission of
Title21 Acknowledge Messages to the transponder
at the end of the transaction.
Dummy Timeslot
(CW) Enable
From the Dummy
Timeslot Enable panel of
the Tag Protocol page:
With Dummy_1/2/3/4
protocol selected,
for each channel, select
Dummy checkbox to
enable CW.
User with
Change
Configuration
permission
DUMTS1
DUMTS2
DUMTS3
DUMTS4
0
per channel
instance:
0-1
Specify the channel/slot firing sequence for the
Dummy_x (CW) frame sequence timeslot where
‘x’ is 1/2/3/4.