Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 100 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Title21 Timeslot
Config.
From the Title21 Channel
Firing Sequence panel of
the Tag Protocol page:
Select the required
Channel # and slot.
User with
Change
Configuration
permission
T21TSC
0
00-FF (hex)
where each bit
represents one
time slot
Specifies the channel/slot firing sequence for the
Title21 frame sequence timeslot.
SeGo Timeslot Config
From the SeGo Channel
Firing Sequence panel of
the Tag Protocol page
Enable the required
Channel #
User with
Change
Configuration
permission
N/A
0
0 – 1 (for Ch#
1 - 8)
Specifies the channel/slot firing sequence for the
SeGo frame sequence timeslot.
6B Read Mode:
From the 6B Advanced
panel of the Tag Protocol
page:
Select read mode from
the drop-down list.
User with
Change
Configuration
permission
6B_RDM
Standard (UDI
only) (0)
Standard (UDI
only) (0)
eATA read –
Single-page
mode
(UDI+eATA) (1)
eATA read –
3-page mode
(UDI+eATA) (2)
Specifies what mode to use when reading ISO
18000-6B tags.
Standard Mode: reads the UID of the tag only.
Single-Page eATA Read Mode: reads both the UID
and the eATA data in the tag, one page at a time,
per superframe, and is a legacy mode that should
be used when SYNCing to legacy MPR2 readers.
3-Page eATA Read Mode: is the preferred option to
attempt to read all 3 pages (UID+eATA in a single
superframe scan.