Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 99 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Time Slot enable
On the Tag Protocol
page:
When a FDM protocol
(6B, 6C, SeGo, ATA) is
selected from the Frame
Sequence,
set toggle switch to ON
in Time Slot table
column to enable firing
for each channel.
For TDM /Title 21
protocol, see the
Channel Firing Sequence
panel in below.
User with
Change
Configuration
permissions
6C_TSC
SGOTSC
6B_TSC
ATATSC
0
0–1
For FDM protocol, specify the tag protocol
channel/slot firing sequence.
TDM Timeslot
Config.
From the TDM Channel
Firing Sequence panel of
the Tag Protocol page:
Select the required
Channel # and slot.
User with
Change
Configuration
permission
IAGTSC
0
00-FF (hex)
where each bit
represents one
time slot
Specifies the channel/slot firing sequence for the
TDM frame sequence timeslot.