Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 87 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Suppress Non-IAG
Tags
From the General tab
on the Configuration
page:
Select Suppress Non-
IAG Tags check box
anyone
NONIAG
(Enabled)
Disabled)
(Enabled)
Disabled: All transactions
are reported
Enabled: Suppresses
reporting of OBUs not
matching the Group ID
with which the Reader is
provisioned
Used to prevent
incompatible
report formats
from being sent
to the LC
Diagnostics Port
Baud Rate
From the General tab
on the Configuration
page:
Select a baud rate from
the Diagnostics Port
Baud Rate drop-down
box
anyone
DIAGBD
(9600)
9600
19200
38400
57600
115200
sets baud rate of
DIAGNOSTICS PORT on
the CTM
Used to establish
a baud rate for
connecting a
service laptop
computer to the
Reader via the
CTM
DIAGNOSTICS
PORT
Reader
configuration Auto-
backup & Recovery
From the General tab
on the Configuration
page:
Select the Reader
configuration Auto-
backup & Recovery
checkbox to enable (if
necessary).
anyone
CNF_BU
(Enabled)
(Disabled)
(Enabled)
Enables or disables
backup of configuration
parameters on compact
flash.
If enabled the
reader can auto-
recover from NV
configuration
checksum
failures on
startup and
avoid a reset to
factory defaults.