Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 82 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
In the navigation side
bar:
Click to activate.
anyone
N/A
N/A
N/A
Controlled Reader
shutdown
Used to shut
down the Reader
in a controlled
manner so that a
clean, manual
power down can
then proceed.
Log Out
In the navigation side
bar:
Click Log Out.
anyone
N/A
N/A
N/A
immediately logs the
current user out of the
CTM web interface
Used to log out
of the CTM web
interface
System
Identification
From the Miscellaneous
Information tab on the
Status page:
Click the System
Identification button.
anyone
N/A
N/A
N/A
causes the CTM MC LED
to flash green-red-amber-
green three times
Used to confirm
which CTM web
interface is being
viewed and that
the computer is
successfully
communicating
with the CTM