Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 80 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Manage Users
In the navigation side
bar:
Click Manage Users.
user with
User Admin
permissions
N/A
N/A
N/A
displays the User
Management page in the
CTM web interface
Used to access
user profiles,
create new
users, delete
users, change
permissions,
change
passwords.
Change Password
In the navigation side
bar:
Click Change Password.
user
WITHOUT
User Admin
permissions
N/A
N/A
N/A
displays a User
Management page
limited to commands for
changing passwords
to change the
password of the
user currently
logged into the
CTM web
interface
Set Time
In the navigation side
bar:
Click Set Time.
anyone
N/A
N/A
N/A
displays the Time
Management page in the
CTM web interface
to
Disable/Enable
Network Time
Protocol (NTP)
access NTP
servers IPv4
addresses and
select a new
time zone