Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Appendix
Confidential UM 360450-210 Revision C Page 284 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Feature
JANUS
Badger
Notes
Feedback OBU support
Y
Beeper and LED on OBU supported
Maintenance Features
Web interface for local/remote Reader
HTTPS access and control
Y
Viewing/modify Reader configuration,
view status, download/run software,
manage OBU Status file
Real time reporting of transactions on
web interface
Y
Advanced / Simple parameter
presentation
Y
each web page has a functional group
Multiple users & permissions per user
Y
Zero re-configuration upon processor
module (CTM) replacement
Y
When a CTM is swapped, Reader
configuration parameters are retained in
the CFM (a non-volatile memory off board
from the CTM).
Save Reader Configuration File to laptop
(also IP addresses and permissions
passwords)
Y
Transition process is made easier. During
service process, reload the original
instead of manual setting many
parameters.
Remote reset (reboot)
Y
reset via a lane controller or the web
interface
Firmware download
Y
Maintain multiple firmware images
Y
At least 6 versions, including factory
image.
Automatic switchover recovery
Y
Reader will return control to Primary
without operator intervention.
USB stick transaction logging
Y
Diagnostics
Diagnostic Port
Y
Y
Test Tag Support
Y
Y