Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Appendix
Confidential UM 360450-210 Revision C Page 239 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
3. Ensure that LC communications is configured, that is, the appropriate Ethernet and Serial selections are
made in the Destinations field.
4. Select the Send Heartbeat messages check box to enable sending heartbeat messaging, as required.
5. Enter a time, in seconds, in the Heartbeat Interval field. This number must be lower than the LC
communication error threshold.
6. Click the General tab.
Result: The following screen appears.