Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 150 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Sync Recovery
Timeout [ms]
N/A
N/A
CHSRTO
120
min: 0
max: 65535
Specifies how long the
Reader waits for the sync
pulse during the sync
recovery process.
Specifies how
long the Reader
waits.
Sync Frame Start
Delay [us]
N/A
N/A
CHSFSD
Specifies the time delay
from the rising edge of
the sync pulse to the
falling edge of the IAG
trigger pulse in the frame.
Specifies the
time delay