Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 147 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Delete All Logs
From the Log Files tab
on the Log Files page:
Click the Delete All Logs
button.
user with
View Log
Files and
Manage Log
Files
permissions
N/A
N/A
N/A
deletes all logs
to free up
memory for
more logs
Copy Log Files to
USB disk
From the USB Logging
tab on the Log Files
page:
Click the Copy Log Files
to USB disk button.
user with
View Log
Files and
Manage Log
Files
permissions
N/A
N/A
N/A
copies all log files to a USB
flash drive inserted in an
CTM USB port
to save a copy of
the Reader log
files for analysis
or for backup
Start Logging to USB
disk
From the USB Logging
tab on the Log Files
page:
Click the Start Logging
to USB disk button.
user with
View Log
Files and
Manage Log
Files
permissions
N/A
N/A
N/A
continuously copies log
files as they are created
and updated to a USB
flash drive inserted in an
CTM USB port
to automatically
create a backup
copy of all logs
Ethernet Logging
(enable)
From the Ethernet
Logging tab on the Log
Files page:
Select the Ethernet
check box, then, click
the Update Ethernet
Logging Configuration
button.
user with
View Log
Files and
Manage Log
Files
permissions
ETHLOG
Disabled)
Disabled
(Enabled
Disabled: No Ethernet
logging
Enabled: the Reader
sends a copy of log files to
a destination computer
via the ETHERNET 1 port
can remotely
access log files
Use this option
only under the
recommendation
of Kapsch
Service.