Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 136 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Minimum Speed
Report sample
count
From the LC tab on the
Configuration page
user with
Advanced
User
permissions
EVSMSS
1
min: 1
max: 10
The reader sets the ZC
field in EVS Report to
9999 when the sample
count
N/A
Destination
From the LC tab on the
Configuration page:
Select the Serial and/or
Ethernet check box for
each RF channel
anyone
LCDEST
1
min: 0
max: 15
Serial: sets channel to
communicate with the LC
by a serial connection
Ethernet: sets channel to
communicate with the LC
by an Ethernet connection
sets how
individual RF
channels
communicate
with the LC