Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 133 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Toll Rate / Balance
Adjustment Tag
Report Format:
From the LC tab on the
Configuration page:
user with
Advanced
User
permissions
TrLcFm
Toll Rate /
Balance
Adjustment
Format
Toll Rate /
Balance
Adjustment
Format
IAG Standard
Format
Specifies what format to
use when issuing reports
for Toll Rate / Balance
Adjustment tags to the
Lane Controller.
Set to 'TRBA
Format' to issue
reports to the
Lane Controller
using the Toll
Rate / Balance
Adjustment
Format.
Set to 'IAG
Standard
Format' to issue
reports to the
Lane Controller
using the IAG
Standard format.
ATA Transponder
Data Format
From the LC tab on the
Configuration page
user with
Advanced
User
permissions
AtaFmt
8-bit ASCII HEX
8-bit ASCII HEX
8-bit ASCII
Alphanumeric
Specify the type of ATA
report formatting to
employ
N/A