Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 105 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Agency ID
From the Tag
Programming tab on
the Configuration page:
With Agency ID
enabled, enter a
numeric Agency ID.
anyone
AID___
0
0 - 127
sets the agency ID
to keep a record
in OBUs of the
agency ID
6C Read-Only Mode
From the Tag
Programming tab on
the Configuration page:
anyone
6CROLY
Enable
Disable
Enable
Controls whether the
reader writes or does not
write to 6C tags.
N/A
6C Try-To-Program
Timeout [sec]
From the Tag
Programming tab on
the Configuration page:
Ensure 6C Read-Only
Mode checkbox is
unchecked.
Enter time quantity in
seconds in the 6C Try-
To-Program Timeout
[sec] field
anyone
6C_TTP
500
min: 0
max:
4294967295
Specifies, in seconds, the
duration after which
additional programming
attempts will be made
with an existing 6C tag.
N/A
IAG Read-Only
Mode
From the Tag
Programming tab on
the Configuration page:
anyone
RDONLY
Disable
Disable
Enable
Controls whether the
reader writes or does not
write to IAG tags.