Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360463-202 Revision: A12 (Draft) Page 70 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

Note: For Readers at entry locations, select Entry Reader; for Readers at exit locations, select Exit

Reader.

4. Select the Enforce Adjustment ID Checking check box to limit how frequently the balance can be

updated.

5. Press Enter to accept the values.

Result: The Reader now charges OBUs based on your choices.

Configuring Protocols

Configure the Reader to interact with various protocol tags.

Prerequisites: You must have Advanced User permissions.

1. After selecting the Configuration link on the left side, select the Channel tab,

Result: The following screen appears.