User's Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210: A7 Page 70 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Ethernet 2 IP
(IRIF 100Mbps)
Address:
From the General tab on the
Configuration page:
Type an ETHERNET 2 port IP
address in the Ethernet 2 (IRIF
100Mbps) IP Address field,
then, , click outside the field,
press Enter, or select a different
tab.
anyone
PRIMIP
192.168.0.50
Primary
192.168.0.51
Secondary
N/A
sets the IP address for the
ETHERNET 2 port on the
CTM
Used to specify
an appropriate
ETHERNET 2 IP
address when
configuring an IR
network
IP Address
From the General tab on the
Configuration page:
Type an IP address in IP Address
field in General tab of the
Configuration page, then, , click
outside the field, press Enter, or
select a different tab.
user with
Advanced
User
permissions
SCNDIP
192.168.0.51
N/A
sets the IP address to the
secondary side of the
reader
Assigns a unique
IPv4 address
(e.g.
192.168.0.51) to
the secondary
side of the
reader. This
address should
be provided by
the SI network
planner.