User's Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision: A7 Page 64 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56
Kapsch TrafficCom
2. When the reader leaves the factory, only those protocols selected by the customer are available for
configuration. All other protocols will be de-selected.
3. Select each channel and use the TDM RF State and FDM RF State to enable or disable a channel.
4. Select the frequency for each channel by using the FDM Frequency (MHZ) selection. This should only be
performed with Kapsch technical support.
5. Select the specific combination of protocols desired. This should only be performed with Kapsch Technical
Support.