User's Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision: A7 Page 56 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56
Kapsch TrafficCom
3. Click the Start Logging to USB Device button.
Result: The USB Logging changes its display from Disabled to Enabled, and USB Device Status changes
to Detected to show there is an active connection between the Reader and the USB flash drive and log files
begin to get copied and updated to the USB device in realtime.
Note: You can click the Copy Log Files to USB device button if you just want to copy the present list of
log files to the USB device.
OBU Programming
The Reader can write data to an OBU as it passes through a toll plaza. The following procedures
outline how to enable OBU programming and how to configure the data that is written to the OBUs.