User's Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNON-MULTIILATERATION LMS TRANSMITTER AND RECEIVER

251

252

253

254

255

256

257

258

259

260

JANUS

Multi-Protocol Reader Ver. 2: Appendix

Confidential UM 360450-210: A7 Page 254 of 282

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56

Kapsch TrafficCom

Figure 8-2: HyperTerminal Configuration for a serial connection to the Diagnostic port

Using RealTerm to connect to the MRFM-S

1. Connect a serial cable from the MRFM LC COM port to a port on your computer.

2. Launch RealTerm.

3. From the Port tab, select 115200 from the Baud drop-down box, set Parity to None, Data Bits to 8,

Stop Bits to 1, Hardware Flow Control to None.

4. Select the COM port number of the computer port you connected to in Step 1 from the Port drop-

down box. Click the  Change button.

Figure 8-3: RealTerm Port tab

5. From the Display tab, select Binary from the Display As column.

6. MRFM-S data now displays in the display pane in the upper half of the RealTerm window.