User's Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNON-MULTIILATERATION LMS TRANSMITTER AND RECEIVER

221

222

223

224

225

226

227

228

229

230

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360450-210: A7 Page 223 of 282

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56

Kapsch TrafficCom

Prerequisites: To reboot from the browser interface, you must have Software Management

permissions.

Rebooting using CTM ON/OFF switch

1. Set the CTM ON/OFF switch to OFF.

2. After five seconds, set the CTM ON/OFF switch back to ON. The CTM POWER LEDs immediately illuminate

solid green. After 90 – 120 sec., the CTM STATUS LEDs illuminate their normal state (see LED Status, page

184).

Rebooting from the browser interface

1. Login to the CTM web Interface.

Result: The following Main Page appears.

2. Select the Manage Software link on the left side panel of the CTM web interface.

Result: The following screen appears.