User's Manual
_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential UM 360450-210: A7 Page 217 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56
Kapsch TrafficCom
5. Set the Offline MRFM-S RF State back to Active.
6. Press Enter.
7. Verify that the DATA LED illuminates solid green.
8. Verify module output powers and power at antenna using a commercial off-the shelf spectrum analyzer.
9. Ensure the MRFM-S is capturing OBU data (see Monitoring OBU transactions as they occur via the
Diagnostics page, page 53).