User's Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNON-MULTIILATERATION LMS TRANSMITTER AND RECEIVER

201

202

203

204

205

206

207

208

209

210

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360450-210: A7 Page 208 of 282

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56

Kapsch TrafficCom

Installing an MRFM-S

CAUTION:

To avoid damaging the modules, ensure that the connector on the

module is properly aligned with the connector on the DSM back plane

before the module is securely plugged into the DSM.

1. Insert the MRFM-S module into the Reader. Tighten the screws to secure the MRFM-S to the Reader rack.

2. Connect the RF cable(s) to the MRFM-S appropriate port and tighten with a proper torque wrench.

3. Select the Configuration link on the left side panel of the CTM web interface.

Result: The following screen appears.

4. Click the Channel tab.

Result: The following screen appears.