User's Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNON-MULTIILATERATION LMS TRANSMITTER AND RECEIVER

161

162

163

164

165

166

167

168

169

170

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360450-210: A7 Page 161 of 282

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56

Kapsch TrafficCom

5. From the Serial Port dropdowns, select an LPM port for each RF channel to use to communicate with the LC.

By default, RF Channel 1 communicates with the LC via LPM COM 1, RF Channel 2 communicates with the

LC via LPM COM 2 and so on up to RF Channel 8.

Note: More than one RF Channel can communicate via one LPM COM port, if necessary.

6. Click the Serial tab on the Configuration page.

Result: The following screen appears.