User's Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210: A7 Page 109 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Dynamic Voting
Control
From the Channel tab on the
Configuration page:
Select Disabled or Reader from
the Dynamic voting control
drop-down box (LC Speed and
LC Ends are not supported),
then, press Enter or select a
different tab.
user with
Advanced
User
permissions
DVCTRL
0 (Disabled)
0 (Disabled)
1 (Reader)
2 (LC Speed)
3 (LC End)
Disabled: no voting
control
Reader: the Reader
monitors the average time
an OBU is in the capture
zone and uses this time to
determine an appropriate
voting time
LC Speed: not currently
supported
LC End: not currently
supported
to set type of
voting control
Dynamic Voting
Sample Size
From the Channel tab on the
Configuration page:
With Dynamic Voting Control
set to Reader, enter the desired
number of samples, then, press
Enter or select a different tab.
user with
Advanced
User
permissions
DVSPSZ
20
1-50
Sets the sample size used
in the Dynamic Voting
Calculation
to configure the
Dynamic Voting
Control
calculation. The
number entered
here is the
number of
previous
transactions
used when
calculating the
average voting
time