User Instructions

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsLMS Non-multilateration Transpoder

Table Of Contents

Kapsch TrafficCom

Transponder Mounting Instructions

For split windshields with a central dividing post:

1. Identify the preferred mounting location 1” from the

bottom of the windshield and 2” to the left of the central

dividing post. If the windshield wiper obscures the

transponder, raise the mounting location to a maximum

of 3” from the bottom of the windshield.

2. If the windshield wiper continues to obscure the

transponder after raising it a maximum of 3” from the

bottom of the windshield, identify a mounting location 2”

to the right of the central dividing post and 1“ from the

bottom of the windshield. If the windshield wiper

obscures the transponder, raise the mounting location to

a maximum of 3” from the bottom of the windshield.

3. Clean the mounting location in accordance with 3M

document 70-0709-4029-4.

4. Remove the protective backing from the two Dual Lock

fasteners and press the transponder onto the mounting

location, ensuring the status LEDs on the left side of the

transponder are facing the driver. Maintain the pressure

for approximately 15 seconds to ensure a good bond.

5. Remove the transponder by lifting any corner with

sufficient force to separate the Dual Lock strips. Do not

reuse the Dual Lock strips after removing them from the

windshield. Obtain new strips as required.

For windshields without a central dividing post:

1. Identify the mounting location 1” from the bottom of the

windshield and in the center of the windshield as

measured from the right and left sides of the windshield.

If the windshield wiper obscures the TDMA V6

transponder, raise the mounting location to a maximum

of 3” from the bottom of the windshield and/or move the

transponder a maximum of 2” to the left or right of the

center of the windshield.

2. Clean the mounting location in accordance with 3M

document 70-0709-4029-4.

3. Remove the protective backing from the two Dual Lock

fasteners and press the transponder onto the mounting

location, ensuring the status LEDs on the left side of the

transponder are facing the driver. Maintain the pressure

for approximately 15 seconds to ensure a good bond.

4. Remove the transponder by lifting any corner with

sufficient force to separate the Dual Lock strips. Do not

reuse the Dual Lock strips after removing them from the

windshield. Obtain new strips as required.

FCC License Notice – This device complies with Part 15 of the FCC rules.

Operation is subject to the condition that this device does not cause harmful

interferences.

Split Windshield – Preferred Mounting Location

Transponder

Status LEDs

Central

Dividing Post

Bottom of

Windshield

1” Preferred

3” Max.

Wiper

2”

Split Windshield – Optional Mounting Location

Transponder

Status LEDs

Central

Dividing

Bottom of

Windshield

1” Preferred

3” Max.

Wiper

2”

Windshield without Central Post - Mounting Location

Transponder

Status LEDs

Centerline of Windshield

Bottom of

Windshield

1” Preferred

3” Max.

Wiper

Center of transponder:

Within 2” (max.) of

Windshield center

Dual Lock

Fasteners

is a provider of intelligent transportation systems in the fields of tolling, traffic

management, smart urban mobility, traffic safety and security,

and connected

vehicles.

As a one-stop solutions provider, Kapsch TrafficCom offers end-to-end

solutions covering the entire value creation chain of its customers, from components

and de

sign to the implementation and operation of systems. The mobility solutions

supplied by Kapsch TrafficCom help make road traffic safer and more reliable,

efficient,

and comfortable in urban areas and on highways alike while helping to

reduce pollution.

The Kapsch Group is a globally operating technology corporation

headquartered in Vienna.

The company's areas of expertise – digitalization and

mobility

– are addressed via two business units: Kapsch BusinessCom and Kapsch

TrafficCom both support their clien

ts and customers in the role of end-to-

end suppliers

and providers of products and solutions along the entire value

-added chain.

Kapsch. challenging limits.

>>> www.kapsch.net