User's Manual

Portable RSE
DOC#: UM 360453-700 REVISION: C Page 47 of 65
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence
and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for
manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: P-RSE USER MANUAL - UM360453-700 REV_C.DOCX 08/19/2016 1:44
Kapsch TrafficCom
RF Power Level settings
The RF signal level can be adjusted when the Portable RSE is configured to use the short-range antenna port. The RF
Power level is fixed at High when the Portable RSE is configured to use the long range antenna port since the purpose
of the long-range antenna port is to use the remote antenna with the Portable RSE. The RF Power Level settings
available are outlined in Table 4-1. The Medium and Low power settings are recommended for use in confined spaces
or when other OBUs are nearby.
Table 4-1: RF power level settings
RF Power Level Function
Low lowest RF signal level used to read OBUs
Medium medium RF signal level used to read OBUs
High highest RF signal level used to read OBUs
Auto attempts to read an OBU at the lowest RF signal
level, then increases the RF signal level until an
OBU is successfully Read, or the Portable RSE
has reached the maximum RF signal level.