User's Manual

Portable RSE
DOC#: UM 360453-700 REVISION: C Page 42 of 65
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended
and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: P-RSE USER MANUAL - UM360453-700 REV_C.DOCX 08/19/2016 1:44
Kapsch TrafficCom
Command How is this command executed? What does this command do? What is the purpose of this command?
Erase OBU Data Navigate to the Configuration screen:
tap Menu in the bottom-right corner, then,
tap Config.
From the Configuration screen, tap the OBU Data
tab, if necessary, then,
tap the Erase OBU Data button, then,
tap OK, then tap Yes to confirm.
deletes all OBU data stored on the
Portable RSE.
to clear the OBU data without
downloading it to the LC.
External Power
(hibernate)
Navigate to the Configuration screen:
tap Menu in the bottom-right corner, then,
tap Config.
From the Configuration screen, tap the Hibernate
tab, if necessary, then,
select the On External Power check box and select
a duration from the drop-down box, then,
tap OK.
enables automatic hibernation
when the Portable RSE is running on
AC power.
to enable the device to automatically
enter Hibernate mode when running
on AC power.
to select the duration of inactivity
before the Portable RSE enters sleep
mode.
LC Transfer From the Main Menu screen:
tap LC Transfer.
displays the LC transfer screen. to navigate to the LC transfer screen,
where OBU data can be transferred to
an LC.