User's Manual

Table Of Contents
Portable RSE
DOC#: UM 360453-700 REVISION: C Page 16 of 65
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence
and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for
manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: P-RSE USER MANUAL - UM360453-700 REV_C.DOCX 08/19/2016 1:44
Kapsch TrafficCom
Charging the Portable RSE battery
CAUTION:
Use only the external power supply intended for the Portable RSE. Using any
other external power source may damage the Portable RSE.
The Portable RSE battery charges via an external power supply connected to the 12VDC jack on the bottom of the
Portable RSE. The Portable RSE battery does not charge when connected to a computer via a USB port. The battery
charging LED flashes red when the battery is charging and illuminates solid red when the battery is fully charged.
The Portable RSE software interface
The Main menu
When the Portable RSE software launches, the main menu screen appears. From here you can navigate to perform the
Portable RSE’s two main functions: reading OBUs and transferring OBU data to the LC.
Figure 2-6: Main Menu screen