Owner's Manual

Handheld Reader (HHR) PDA Kit – Owners manual A316000-853 Handheld Reader (HHR) PDA Kit – Owners manual A316000-853
Fig. 2 - Position the HHR over the tag to be read
Note: it is best to have the arrows on the antennae surfaces of both the
reader and the tag aligned in the same direction and “opposed”.
©
IAG FPT
IAG FPT
Best
OK
Not OK
Hold the HHR about 1-8 inches away from the tag.
Use the PDA “Request Tag Data Button” to initiate the
tag read. If the tag is not read, move the HHR closer to
the tag and try again.
Refer to the “HHR-PDA Operator’s manual” document
A316000-854 supplied in your HHR system kit.
HHR System Kit (excluding documents):
Qty P/N Description
1 801283-247 Hand Held Reader
1 801282-001 Cable, HHR to PDA direct
1 801828-002 Cable, DB9 adapter
1 700731-008 diskette with HHR program for download to PDA
System connections for program download to PDA
power pack
power
mains
PDA
RS-232
PDA
base
System connections for read, display, collect data
tag
HHR
PDA
RS-232
801282-001
System connections
HHR direct to a PDA.
or
tag
HHR
PDA
RS-232
801282-002
System connections
HHR to a PDA set in
its charger base.
power pack
power
mains
PDA
base
1. Take all tag readings with the PDA attached and store the data.
Note: 801282-002 is the HHR adapter cable. 801282-001 is the HHR to
PDA direct connection cable. (See the identity photos on the last page.)
System connections for data upload to a host
power pack
power
mains
PDA
RS-232
PDA
base
2. Re-connect the PDA to the host computer to upload the stored data.
Notes:
Refer to the “HHR-PDA Operator’s manual” (document A316000-854
supplied in your HHR system kit) for use of the PDA when you want to:
read a tag and immediately display the data on the PDA
review the records of all tags in the PDA database
“beam” the tag database to another PDA
upload the tag database from the PDA to a “host” computer
download the HHReader program to the PDA from a PC
file: HHR Kit Owners manual Rev. A 2003 MKIV IVHS