User's Manual

T600 Tag Tester User Guide
5. First Time Usage
Power up the T600 Tag Tester. The front panel red light should be on for a few
seconds then turn off.
Video settings: The recommended display adapter resolution is 1024 by 768.
Start the T600 PC application by clicking on the executable filename or icon.
(You may want to create a shortcut on the desktop).
5.1 Serial Port Configuration
From the menu bar, select Settings | Configuration.
On the left side of the window (“T600”), select the proper PC COM port where the
“HOST” cable has been connected. Do not change the baud rate.
On the right side of the window (“Scanner”), select the COM port where the
“SCANNER” cable has been connected.
A316000-852 Jan 19, 2009 Page 10 of 19
© 2009 MARK IV INDUSTRIES LTD.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND SPECIFICATIONS CONTAIN
PROPRIETARY INFORMATION AND ARE THE PROPERTY OF MARK IV INDUSTRIES LTD. AND ARE ISSUED IN STRICT
CONFIDENCE AND SHALL NOT BE TRANSMITTED OR REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE
OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION.