User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699

5.5.5 View Diagnostic data

Note: These two "windows" are service tools used only by MARK IV personnel.

5.5.6 Default View Page ("page" = Windows® folder tab)

The folder tabs are initially revealed after reading a tag. On the very first program bootup, the set default tab

that is opened for display is "Factory/Agency". The Supervisor is allowed to select another default folder tab to

be displayed upon reading a tag. This makes the task easier when

viewing results of reading many tags when comparing specific data.

Click on the arrow button on the right side of the pop down menu.

Select a folder tab from the list displayed.

Example: If you are only comparing the LCD data from a batch of Type

2 LCD tags then select the folder tab "LCD" as the default. The TPS will

then automatically show that set of data after each tag is read or

written.

5.6 Exit (Quit the TPS program)

Only a Supervisor may terminate a TPS program session.

The Supervisor selects the main menu item " Supervisor", then clicks on the "Exit" sub-menu item.