User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699

5.5 Configure the TPS program resources

• Select the main menu "Supervisor" item and click on the sub-menu "Configuration" item.

• The TPS Configuration folder tabs are displayed.

5.5.1 Set Logout Timer parameters

This feature sets the TPS program to idle when there has been no activity for the set time limit.

If the logout timer ever forces the logout then a message appears as…

Select the desired function by

clicking on the folder tab.

The selection parameters for

each folder tab are described in

the following sections.

Select this function by clicking on the "Logout Timer"

folder tab.

Activate the timer by clicking on the "Auto logout"

checkbox, a checkmark "√" appears. The "Apply" button

will become highlighted. Click on "Apply" to accept the

displayed settings.

De-activate the timer by clicking again on the box, the

checkmark disappears. Click on "Apply" to accept the

displayed settings.

Set the duration of the timer in minutes by typing a

value (1 to 180) in the "Logout Idle Time" box. Click on

"Apply" to accept the displayed settings. The default is

set at 30 minutes.

Click on "OK" to exit from this menu.