Manualshelf

User's Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsT500 Tag Programming Station
31323334353637383940
USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699
©1999-2008 MARK IV INDUSTRIES CORP. I.V.H.S. DIVISION pg. 35 of 69
• After verifying that the Scratch Pad Custom Data are correct you must then verify that the LCD data bits
are set to the desired value. Click on the "LCD" folder tab.
At this point the data to be programmed has been visually verified. The tag may now be programmed. Refer to
the section Program a Type 2 LCD Tag.
Note:
The "Balance" is in
increments of nickels.