User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699

3.1.1 Notes regarding the location of various program files

After you run the program for the first time, the following files are created in the Windows

directory.

Note:

After you install the program, the following files are loaded in the application directory. If you have used the

TPS installation defaults, the application directory will be as shown below.

After you subsequently read or programmed tags then

several of the files with the extension ".TXT" are created in

the application directory. If you have used the TPS

installation defaults, the application directory will be

C:\Program Files\Markiv\T500 Tag Programmer\*.*

After you create new templates for

programming tags then several of the

files with the extension ".TPL" are

created. The directory of template files

is C:\TagTemplates\*.* provided that

you accepted the default directory path

when you saved those templates.

WARNING !

Do not erase or move, or

change the properties or

the names of these files.

WARNING !

Do not erase or move, or

change the properties or

the names of these files.

WARNING !

Do not erase or move, or change the

properties or the names of these files.

IMPORTANT !

Template files may be stored anywhere however, for the

purpose of easier system maintenance, try to use the

same directory path each time you save a new template.