Operating Guide

ManualsBrandsKAPRO ManualsLaser Distance Measurers383

Units of Measurement:

Select the Unit mode and then

select from m, ft, in. ft+in. Then

press the Clear button to exit the

Unit mode

SPECIFICATIONS

Measuring Range 0.5m - 30m

Resolution 0.001m

Accuracy ±2mm/30m (0.00492126)

Laser Class II, 635 nm, <1mW

Battery AAA batteries x2

Battery Life Up to 5,000 measurements

Operating Temperature -10°C (14°F) to 40°C (104°F)

Storage Temperature -20°C (-4°F) to 60°C (140°F)

Laser Auto-off 20 seconds

Maintenance

• Clean the aperture lens and the unit’s body using a clean soft

cloth only. Do not use solvents.

• If the unit is exposed to water, dry it before storing.

• Remove the battery if the unit will be unused for a long period of

time.

Error Codes

Code Description Solution

Err01 The reected laser

light is too bright

Direct the laser at a less

reective surface

Err02 Out of Range Make a measurement within

the 30m (100’) range

Err03 The target is not

reecting the laser

Point the laser at a more

reective target

Err04 Low battery Insert a new battery

FEATURES

• Indoor measuring distance of up to 30m (100')

• LCD display

• Measures area and volume

• Indirect measuring using Pythagorean theorem

• 2 Measuring reference points

• Memory function

• Accuracy: ±2mm/30m

Laser distance Measurer K1

Model No. 383

NOTE

Keep this user manual for future reference.

SAFETY INSTRUCTIONS

WARNING

This product is a class II laser.

Danger of laser radiation

• The use of protective eyewear is recommended

• Serious eye injury can result from looking directly into the beam or

by projecting the beam into the eyes of others.

• Do not operate the laser distance measurer near children or let

children operate the laser measurer.

• Do not look into a laser beam using magnifying optical equipment,

such as binoculars or telescope, as this will increase the level of eye

injury.

• Do not take the unit apart.

• Do not use in wet or very humid environments.

• Do not use in combustible environments such as in the presence of

ammable liquids, gases or dust.

• When not in use turn off the power and store in a dry place.

BATTERY INSTALLATION

• The 383 Laser Distance Measurer is powered by 2 AAA batteries

located at the back of the device. Open the cover and replace when

necessary.

• Battery life status is indicated by an icon on the initial screen.

• The estimated battery life is up to 5000 measurements

OVERVIEW

A. ON switch and Measure button

B. Menu selection button

C. OFF and Clear button

OPERATION

The 383 has a simple keypad that allows you to select various

measuring modes using the Menu Selection butten. The current mode

is indicated by the following:

Measuring:

Once you have selected the measuring mode you need, point the

laser at the target and press the Measure button. For Area, Volume

and Indirect Measurements take the measurements

according to the dimensions indicated by the

ashing line.

Area and Volume:

Indirect Measurements:

Indicates the reference point for taking measurements.

Press and hold the Menu selection button to change the

reference point.

Laser pointer is activated

Single distance measurement – The basic mode when

switching-on the unit. Return to this mode by pushing the

CLEAR button.

For continuous measuring, press and hold the

Measurement/Selector button for several seconds.

Area Measurement

Volume Measurement

Single Indirect Measurement (Pythagorean Theorem)

Double Indirect Measurement (Pythagorean Theorem)

0.000 M