Operation Manual

4.7 Common Interface(CI Model Only)

The menus are provided by the CA module and its smart card.

Your receiver is equipped with two slots of Common Interface(CI), accepting both Type

1 and Type 2 PCMCIA modules(see diagram below.). Plug in the appropriate CI module

together with a valid smart card. You will then have access to the respective scrambled

and Pay-Per-View services.

Insert the smart card into the CI module, and the CI module into the slot behind the flap

on the front panel.

The CI and smart card modules determine the programs that can be de-scrambled. The

receiver supports two CI slots so you can plug in two different modules, automatically

provide access to both services.

Each smart card contains your subscription details. You can view your entitlement via

the COMMON INTERFACE menu by using the MENU button as below.

a Press the MENU button and select Common

Interface then Slot1 and Slot2 will be showed up on

the screen and the menu will be appeared. If you use

Slot1 for Irdeto, you will see “Irdeto” on the screen.

Also if you use Slot2 for Viaccess, you will see

“Viaccess” on the screen. Select the item and then

you will see information for card. Press EXIT button if

you wish to exit from this menu.

b If you inserted the smart card with CAM into the

receiver, and switch on the receiver. Then you will

see “CAM Initializing icon” on the top screen.

c If you do not insert the smart card, you will see the

message “Insert the valid smart card”. If you insert

the smart card into the CI module then you can watch

your selected channel.

N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 60 mac-4 HP LaserJet 5100 Series T