Operation Manual

RMCS Usage

With this function, you can connect the receiver

remotely to the Ethernet. Decide whether or not to

use the RMCS function. When you set it to “ON”, you

can use the RMCS function.

a Press the UP/DOWN button on the Setup list to

select RMCS Usage and then press the OK

button.

b Press the RIGHT button to move to the right pop-

up menu.

c If you want the remote setting, press the

UP/DOWN button to select ON and then press

the OK button.

Analog PVR/DVR Option

With this function, you can set the Analog PVR, and

DVR recording.

The analog PVR enables you to record audio and

video signals to the HDD when receiving external

analog audio and video signals. There are two kinds

of analog signal; Video and Audio.

The DVR enables you to save audio and video

signals recorded with an exterior camera to the HDD.

a Press the UP/DOWN button on the Setup list to

select the Analog PVR/DVR Option and then

press the OK button.

b When the Analog PVR/DVR Option pop-up

window appears, press the LEFT/RIGHT button

to select either Analog PVR, DVR Option or Off

and then press the OK button.

c When the selected list appears, press the

UP/DOWN button to select and then set again.

• Analog PVR

Analog PVR Video Quality

With this function, you can set the size of the analog

data. There are three size options; Standard, High

and Very High. Very High is the largeest and offers

the best quality.

Press the UP/DOWN button to select the desired

item and then press the OK button.

• When recording using

both two tuners, you

cannot record with the

DVR or the Analog

PVR.

N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 54 mac-4 HP LaserJet 5100 Series T