Operation Manual

RF Channel

Select this alternative if you have to change the RF

channel.

Select an UHF Channel you want with the UP/DOWN

buttons. The RF Channel ranges from 21 to 69.

RF Mode

You can select the RF Mode. If you get picture but no

sound, the RF Mode selecting might be wrong.

Select an RF Mode and then press the OK button.

System Information

Displays the system information: MODEL name, Last

Update, S/W, H/W, Loader version, C.A

Press the UP/DOWN button on the Setup list to

select System Information and then press the OK

button.

Factory Reset

Press the UP/DOWN button on the Setup list to

select Factory Reset.

Use this option only if you have to start the complete

installation procedure from scratch. If you continue

from here, all your previous settings and all channels

will be cleared! The default data will be loaded.

If you press the OK button, it asks for your

confirmation.

If you want to reset, press the OK button, or press

the EXIT button to exit this menu.

• RF Mode

PAL BG, PAL I, PAL

DK, SECAM L, NTSC M

N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 53 mac-4 HP LaserJet 5100 Series T