Operation Manual

51
Auto Power (option)
1. If the Auto Power is set to On and power is off, the Set
turns on automatically and turns into the channel
mode which you were watching before power
breakdown.
2. If the Auto Power is set to Off and power is off, the Set
turns into the standby mode.
4 Display
a Press the UP/DOWN button on the Setup list to
select Display and press the OK button.
b Press the UP/DOWN button to select either
Screen Type, Menu Transparency, SCART
Output, SPDIF Output, RF Channel, RF Mode
or TV Type and then press the RIGHT button to
move to the right pop-up menu.
TV
If you have a TV set with 4:3 picture format, select
4:3 TV. and If you have a TV set With 16:9 picture
format, select 16:9 TV.
Screen Type
If you have a TV set with the 4:3 picture format and
the transmission is in 16:9, you can select Full,
letterbox and Cinema.
If you have a TV set with the 16:9 picture format and
the transmission is in 4:3, you can select Full, Pilar
Box and Cinema.
Select the aspect ratio of TV which is connected to
the receiver and then press the OK button.
Menu Transparency
From 20% to 100% will give the variable
transparency on Video and OSD screen.
To set menu transparency, press the UP/DOWN
buttons.
The transparency will be applied on the screen.
N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 51 mac-4 HP LaserJet 5100 Series T