Operation Manual

50
1
2
3
4
5
6
7
?
3
Lock Control
a Press the UP/DOWN button on the Set list to
select Lock Control and then press the OK
button.
b Press the UP/DOWN button to select either Menu
Lock, Parental Lock, Receiver Lock or Change
PIN Code and then press the RIGHT button to
move to the right pop-up menu.
Menu Lock
If the Menu Lock is already set, the PIN code is
needed to set the Edit Channel List and System
Setting.
If you want to set the Menu Lock, press the
UP/DOWN button to select Locked and then press
the OK button.
Parental Lock
When you change “Parental Lock” to “On” or “Off”,
service channel can get or not from that set values. If
you select “On”, you may need PIN code every time
you select the lock channel program as you set in the
channel control.
If you select “Off”, you can see all channels without
PIN code.
Receiver Lock
If you select “On”, you will have to enter the PIN code
every time you start the receiver from standby.
Change PIN Code
From here you can change the PIN code from the
standard 0000. DO NOT FORGET IT! Without it, you
are not able to access to any of the functions where
the code is required.
You can change password for Parental Lock and
Receiver Lock simultaneously.
a Input the current PIN code using the NUMERIC
button on the remote control.
b In the highlighted new PIN code, input a new PIN
code.
c To verify the new PIN code, re-enter a new PIN
code in the highlighted confirm PIN code. If the
PIN code is correct, the message “Success” will
be displayed on the display window.
• If you forget the PIN
code, press the
RGYB(Color) button in
sequence. (i.e. Red ->
Green -> Yellow ->
Blue button) The PIN
code will be changed
to 0000.
N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 50 mac-4 HP LaserJet 5100 Series T