Operation Manual

Timer

With this function, you can set reserved recording

functions including adding, changing and deleting

reserved recordings.

You can add a reserved recording.

a Press the UP/DOWN button on the PVR menu to

select the Timer and then press the OK button.

b If you press the BLUE button on the Timer

screen, the Add screen will appear.

c Press the UP/DOWN button on the Add screen to

select the items for setting. These are as follows;

• Type: To set the type of reserved recording.

There are three kinds of reserved recording:

PVR, DVR and Analog PVR.

• Mode: To set the interval for the reserved

recording. You can choose to record once,

every day or every week.

• Date: To set the date for the reserved

recording.

•

Time: To set the time the reserved recording starts.

• End Time: To set the time the reserved

recording Ends.If End time is passed, the

reserved recording will stop.

• Option: appears when you set the Type to

DVR, and you can choose either Normal or

Event. If you choose Normal, you can record for

a designated time. In the case of Event, an

exterior sensor will run for a designated time.

While the exterior sensor is running, if an Event

occurs it records in accordance with the setting

in the Analog PVR/DVR Option of the System

Setting menu. Please refer to [4. Main Menu

Guide - 4.5 System Setting - 8. Analog

PVR/DVR Option] for more details.

• Channel: appears when you set the Type to

PVR. Press the OK button to set the channel

you want to record.

• Power off: If you select “Yes”, the receiver turns

to the Stand by mode automatically after the

recording. If you select “No”, the receiver

doesn’t turn to the Stand by mode.

d Press the RED button to save. The details of the

setting will be displayed on the Timer screen.

N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 45 mac-4 HP LaserJet 5100 Series T