Operation Manual

36
1
2
3
4
5
6
7
?
12
DiSEqC 1.2 and USALS
Press the BLUE button to set Drive(Fine Drive or
Normal Drive) to run the motor.
• Fine Drive/Normal Drive: To move the motor, press
the LEFT/RIGHT Button.
• Go to zero: To move the zero position, press the
OK button.
• Store to location: To store the current position,
press the OK button.
• East Limit: To set the east limit by current position,
press the OK button.
• West Limit: To set the west limit by current position,
press the OK button.
• Clear Limit: To clear the stored limit value, press the
OK button.
• After selecting all that is necessary, press the RED
button to scan the satellite list. Pop up widow will
bedisplayed.
• Select ON or OFF according to your Network.
• Select All or FTA Search Type.
• Press the OK button and searching will start.
note
• After the Degree, Longitude and Latitude is entered
accurately, the DiSEqC Motor will automatically move
to the satellite’s position.
N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 36 mac-4 HP LaserJet 5100 Series T