Operation Manual

C-LNB Freq.: When selecting the C/KU Switch is

selected as “None”, the C-LNB Freq will be dimmed

automatically.

Press the OK button, and then the C-LNB Freq. list

will be displayed. You can also input the freq. you

want. After inputting freq. Using the NUMERIC

buttons, press the OK button.(None, DiSEqC Switch)

8 LNB Power: Select the LNB Power On or OFF.

22KHz: Depending on the user’s antenna switch box

or LNB. You can supply either 22KHz by setting “ON”

or not by setting “OFF”.

Tone Burst: Depending on the user’s antenna

switch box. (“off”, “SAT A” or “SAT B”)

11 DiSEqC: You can select and use appropriate port

for your DiSEqC switch box. Press the OK button to

select DiSEqC List. (None, DiSEqC A, DiSEqC B,

DiSEqC C, DiSEqC D, Motor, USALS)

• After selecting all that is necessary, press the RED

button to scan the satellite list. Pop up widow will

be displayed.

• Select ON or OFF according to your Network.

• Select All or FTA Search Type.

• Press the OK button and searching will start.

N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 35 mac-4 HP LaserJet 5100 Series T